Chevron Pillow  This stylish and easy to make Chevron Pillow is the perfect gift for a new home owner. Equally lovely on a chair, couch or bed, this pillow's simple geometric motif will brighten any room in the house.


Step 1

First begin by cutting the fabrics you are using to construct your pillow.

Step 2

Cut one 18 x 18" square from the linen or solid fabric of your choice – this will be the front of your pillow.

Step 3

Cut two 18 x 14" rectangles of your cotton solid, these will form the envelope closure (BACK) of your pillow.

Step 4

Set aside the 18 x 18" pillow front and two 18 x 14" rectangles for now.

Step 5

Begin preparing the fabric for your appliqué.

Step 6

Trace the appropriate number of chevron pattern pieces from the template provided in your pattern onto the paper side of your fusible webbing and cut them out. (See Figure 1)

Figure 1 - Trace chevron pattern onto fusible webbing

Figure 1 - Trace chevron pattern onto fusible webbing

Step 7

One side of the webbing is a very thin web of heat sensitive glue, the other side is a paper that can be drawn on easily – it is transparent enough to see through and trace your pattern pieces with a pencil or pen.

Step 8

When you are done tracing the pattern pieces onto the fusible webbing cut out all of your chevron shapes and use a hot steamy iron to adhere them, glue side DOWN to the WRONG SIDE (BACK) of your appliqué fabrics. (See Figure 2)

Figure 2 - Adhere webbing to on WRONG side of appliqué fabrics.

Figure 2 - Adhere webbing to on WRONG side of appliqué fabrics.

Step 9

Have your iron set to the “cotton / linen” setting and make sure that there is plenty of steam.

Step 10

Next, following the guidelines on your pattern image, place your cut out pattern pieces onto your 18 x 18" pillow front. (See Figure 3)

Figure 3 - Remove paper backing and place fabric onto your pillow front.

Figure 3 - Remove paper backing and place fabric onto your pillow front.

Step 11

When you have everything where it should be, use your iron to slowly set everything in place onto front of your pillow.

Step 12

The heat from the iron will fuse your appliqué pieces to your pillow front and eliminates the need for pins.
(See Figure 4)

Figure 4 - Iron appliqué pieces onto the pillow front

Figure 4 - Iron appliqué pieces onto the pillow front

Step 13

To prevent the edges of your appliqué pieces from fraying, sew around each individual appliqué piece with a tight zigzag stitch. 

Step 14

Each sewing machine is different so you will have to adjust your machine’s stitch settings, varying the width and length of your zigzag stitch.

Step 15

Adjust your machine until you have a zigzag that is the width you like, with a short stitch length so that the stitching is nice and tight and will keep your fabric from fraying.

Step 16

Center the stitch over the outer edge of your appliqués, and simply sew around the perimeter of each piece.

I strongly suggest using a thread that is the same color as the appliqué fabric. It will hide flaws and make your finished pillow look much cleaner and more professional. (See Figure 5)

Since this way of sewing may be new to you, cut out an extra chevron and iron it onto a scrap of fabric to practice your zigzag stitching before you begin working on your finished pillow- you will be very happy that you did!

Step 17

When you have finished zigzag stitching around the perimeter of all of your appliqué pieces give your finished pillow front a good pressing with the iron and set it aside.

Step 18

Now begin work on the two 18 x 14” rectangles of the fabric that will make up the envelope closure (BACK) of your pillow.

Step 19

On each of the rectangles, fold over and press a 1/2” seam, and then fold over and press again, pinning into place. (See figure 6)

Figure 6 - Pressing 1⁄2" seam

Figure 6 - Pressing 1⁄2" seam

Step 20

Run a straight stitch with your sewing machine through the center of the fold creating a finished edge.

Step 21

Repeat on both pieces of fabric.

Step 22

When you have sewn finished edges onto both 18 x 14” rectangles that make up the back of your pillow, place them RIGHT side down on top of your finished appliqué pillow FRONT so that all right sides are squared up and the seams of the envelope closure overlap.

Step 23

Pin all sides of your project together and sew around the edge of your pillow using a straight stitch and 1/2” seam allowance. (See figure 7)

Figure 7 - Sew around the edges

Figure 7 - Sew around the edges

Step 24

When you are done sewing all sides of your pillow together, remove all of the pins, turn your pillow right side out and give it a good pressing so that it is flat and crisp.

Step 25

You can now open the “envelope” that was formed at the back of your pillow by the overlapping rectangles and place your pillow form inside. (See figure 8)

Figure 8 - Finished pillow

Figure 8 - Finished pillow


1 yard Trans-Web fusible webbing

1 and 1/4 yard linen, or medium weight cotton in a solid color (for your pillow background)

1/4 yard of each of your appliqué fabrics – select at least 4, I used a combination of Liberty of London floral cottons for my design.

100% cotton thread to match your appliqué fabrics, 1 spool for each color of fabric you choose

18×18 Pillow Insert

Sharp scissors

A Pencil


Sewing Machine

Chevron Template Pieces
 (Download PDF) 

Chevron Placement Guide (Download PDF)